Product Description
This replacement pipe is for performance testing & tuning on the Rotax 1330
Add performance and sound to your RT and F3 and drop a few pounds in the process. Sounds good on the RT but sounds fantastic on the F3! You can use the optional baffle with the pipe to quiet it down a bit and add back pressure and torque. We recommend you try it without the baffle if louder is what you're looking for. The baffle provided will tame the sound down a bit but will still have a great exhaust note. You have options and that's a good thing. To install the baffle simply insert the baffle in the spring end of the pipe and mark it for the 1/4" hole you will drill to install the baffle.
There are no instructions with the pipe, simply remove the old pipe and replace with the new performance pipe. We recommend that you let the bike idle for 10 min. or so to let the computer learn the new flow. If you plan to use it on road check with your local and state agencies.
Fits all Models with the 1330 Engine
RT 2014 - Present
RT / RT-S / RT-LTD
F3 2015 - Present
F3 / F3-S / F3-T / F3-LTD
NOTE: For year 2015-2017 F3/F3T/RT the rear mount has been removed as it is not needed for mounting.
If you have any questions about this product email us at LamonsterGarageSales@gmail.com
WARNING: California Residents - www.p65warnings.ca.gov
Product Videos
Custom Field
Product Reviews
33 Reviews Hide Reviews Show Reviews
-
Pipe
Great product sound good light weight less heat seem like more power
-
Cat delete
I got the idea from YouTube to use cat delete on my 22 spyder f3s. Install was quick & simple. Running with no baffle & stock muffler the difference is evident! Sounds 100 percent better!
-
Muffler eliminator pipe
This is a great item . It shredded weight off , it took the heat off the seat and the sound it added is great . Feels like it helped with low end torque. Can't wait to to due the performance rear muffler. . The install was easy takes about 30 minutes.
-
The product was easy to install
I love ❤️ the sound of my SPYDER F3S, it's not overwhelmingly loud.
-
Easy install
Install was easy. Even hooking up all 3 springs was cake with all the room made after removing muffler. Lost a good bit of weight with removing muffler. Trying it without any baffle in it to see how it sounds for a bit. Will be easy to dismount and change/add baffle if needed.
-
Lamonster pipe
Så här ska en spyder f3s låta den ryker ifrån bra vid gaspådrag
-
performance primary muffler replacement pipe
install easy til you get to spring on top of pipe….a bit of a challenge. great sound lost lotsa weight and heat underneath engine and floor boards all said and done a great part with good sound. not too loud just right. another great part from lamonster garage. thanks again.
-
PERFORMANCE PRIMARY MUFFLER REPLACEMENT PIPE, ALL 1330 MOTORS
Included tool worked very well. I didn’t use the baffles yet, might not. The pipe was a relatively easy install, very straight forward. Just fits like it was made for this purpose. The sound is louder, still even, and doesn’t pop on decel, very good seal at the joints.
-
Can delete
Everything from Lamonster is wonderful. Highly recommended.
