Product Description
This replacement pipe is for performance testing & tuning on the Rotax 1330
Add performance and sound to your RT and F3 and drop a few pounds in the process. Sounds good on the RT but sounds fantastic on the F3! You can use the optional baffle with the pipe to quiet it down a bit and add back pressure and torque. We recommend you try it without the baffle if louder is what you're looking for. The baffle provided will tame the sound down a bit but will still have a great exhaust note. You have options and that's a good thing. To install the baffle simply insert the baffle in the spring end of the pipe and mark it for the 1/4" hole you will drill to install the baffle.
There are no instructions with the pipe, simply remove the old pipe and replace with the new performance pipe. We recommend that you let the bike idle for 10 min. or so to let the computer learn the new flow. If you plan to use it on road check with your local and state agencies.
Fits all Models with the 1330 Engine
RT 2014 - 2024
RT / RT-S / RT-LTD
F3 2015 - 2024
F3 / F3-S / F3-T / F3-LTD
NOTE: For year 2015-2017 F3/F3T/RT the rear mount has been removed as it is not needed for mounting.
If you have any questions about this product email us at LamonsterGarageSales@gmail.com
WARNING: California Residents - www.p65warnings.ca.gov
Product Videos
Custom Field
Product Reviews
38 Reviews Hide Reviews Show Reviews
-
Performance Pipe
I recently replaced my primary exhaust with your replacement pipe on my F3L. I did not like the sound with the stock pipe, so I thought I would try yours. Glad I did! Now the bike sounds like a motorcycle! Has a nice throaty growl, but not too loud to be annoying to people around. Bike sounds great when going up through the gears when accelerating. Highly recommended!!
-
Pipe
This reduces my bike weight by 16 lbs. sounds good with RLS Crusher on my F3L
-
Loose the Weight
Sounds better and lost 16.9 lbs. with the cat off
-
Performance Primary Muffler Replacement
This product is high quality. The top spring on mt 22 RTL was difficult to re-hook, the spring hook tool that comes with the pipe is not made out of heavy enough material and bends to easily, I would up tossing the tool in the trash and used needle nose pliers and a pry bar to re-hook the springs. The pipe has a nice sound without the baffle, not to loud.
-
Perf Muffler Replacement Pipe
Used the baffle that came with it with the end cap popped off. Exhaust sound has a nice burble note, never too loud or annoying at idle or hard acceleration. Huge plus is the removal of all that heat rising from under the seat.
-
PRIMARY MUFFLER REPLACEMENT PIPE
Great fit and easy install. i took off the 1pc. performance exhaust I purchased elsewhere that was too loud. I put the replacement pipe on with the stock secondary muffler and it sounds much better and I picked up 10 mph on the top end.
-
performance exhaust
I installed this on my RT-S with my stock muffler. Its not overly loud but gives the Spyder a nice throater sound. I am very happy with it !!!
-
Cat delete pipe
Pipe seems very well put together, baffle is good,fit good.
-
Performance muffler
One of the best upgrade to can do to your Can am spyder F3
