Product Description
This replacement pipe is for performance testing & tuning on the Rotax 1330
Add performance and sound to your RT and F3 and drop a few pounds in the process. Sounds good on the RT but sounds fantastic on the F3! You can use the optional baffle with the pipe to quiet it down a bit and add back pressure and torque. We recommend you try it without the baffle if louder is what you're looking for. The baffle provided will tame the sound down a bit but will still have a great exhaust note. You have options and that's a good thing. To install the baffle simply insert the baffle in the spring end of the pipe and mark it for the 1/4" hole you will drill to install the baffle.
There are no instructions with the pipe, simply remove the old pipe and replace with the new performance pipe. We recommend that you let the bike idle for 10 min. or so to let the computer learn the new flow. If you plan to use it on road check with your local and state agencies.
Fits all Models with the 1330 Engine
RT 2014 - 2024
RT / RT-S / RT-LTD
F3 2015 - 2024
F3 / F3-S / F3-T / F3-LTD
NOTE: For year 2015-2017 F3/F3T/RT the rear mount has been removed as it is not needed for mounting.
If you have any questions about this product email us at LamonsterGarageSales@gmail.com
WARNING: California Residents - www.p65warnings.ca.gov
Product Videos
Product Reviews
38 Reviews Hide Reviews Show Reviews
-
Easy install
Install was easy. Even hooking up all 3 springs was cake with all the room made after removing muffler. Lost a good bit of weight with removing muffler. Trying it without any baffle in it to see how it sounds for a bit. Will be easy to dismount and change/add baffle if needed.
-
Lamonster pipe
Så här ska en spyder f3s låta den ryker ifrån bra vid gaspådrag
-
performance primary muffler replacement pipe
install easy til you get to spring on top of pipe….a bit of a challenge. great sound lost lotsa weight and heat underneath engine and floor boards all said and done a great part with good sound. not too loud just right. another great part from lamonster garage. thanks again.
-
PERFORMANCE PRIMARY MUFFLER REPLACEMENT PIPE, ALL 1330 MOTORS
Included tool worked very well. I didn’t use the baffles yet, might not. The pipe was a relatively easy install, very straight forward. Just fits like it was made for this purpose. The sound is louder, still even, and doesn’t pop on decel, very good seal at the joints.
-
Can delete
Everything from Lamonster is wonderful. Highly recommended.
-
Cat Delete Pipe
It eliminated about 20 or so pounds.
-
The pipe is outstanding and gets 5 stars... the tool, not so much
The included tool is shorter than those I've seen in videos. On the F3T, there is no alignment in which the tool can be used on the top spring where an adult can grasp the tool with both hands - necessary to stretch the top spring and attach it. FYI, I used a cord with a loop on the end that I slipped over the spring hook. That enabled me to use a pry tool against a frame member to stretch the spring and attach it. The tool works fine for the other two springs. The 5-star rating is for the pipe itself - I'd rate the tool separately at a 3 per the above. I still recommend this replacement exhaust.
-
Just as advertised , good Qualty
Very pleased , reduced the heat on right leg a lot , used with baffle with plug in place, no more noise , does have a pleasant purr at steady speed .
-
Performance replacement pipe
Good quality pipe at a fair price. Install is pretty easy. One spring is a little hard to get on and off. Tried it with the baffle. Got a little vibration noise from the baffle. Sounds better without the baffle. Running it with stock exhaust. Shipped quickly.
