Product Description
All new updated mounting plate 2.0!!
Fits All F3 Models, All RT Models
F3, F3-S, F3-T, F3-LTD. Including 2015 - 2024 (Does Not Fit Drag Bars)
RT, RT-S, RT-LTD. Including 2010 - 2024 (Does Not Fit Tri-Axis Bars / 219400344) (Does Not Fit Adjustable Handlebar Bars / 219401046)
Fits All Canyon Models.
Canyon, Canyon XT, Canyon Redrock
All ST Models.
ST, ST-S, ST-LTD
RS Models 2013-2016
RS, RSS 2013-2016
A new simple, affordable and good looking solution for mounting RAM products to your F3 & RT. Will not work on RT Tri-axis bars. Looks like a factory option.
Included in this kit is the stainless mounting bolts with spacers (2 pieces each) , 1" RAM tough ball, and powder coated laser cut mounting plate.
Many options available for this part such as the Lamonster Phone Holder, Ram X-Grip, Lamonster GPS Swivel and the USB Cable Holder / Power Supply.
If you are looking for USB Power for any of the 3 phone options CLICK HERE to get the USB Cable Holder / USB Power Supply.
Lamonster Approved Phone Holder with 1" Ram Ball Mount (LGA-4018)
This is a very solid mount compared to others on the market. It comes with a 1" ram ball on it so it will directly replace an X-Grip.
Material:
Aluminum alloy
Width:
55mm (2 3/16") can be adjusted 100mm (3 1/2")
Phone holder has six claws to hold your phone securely in mount.
Cradle Dimensions: (Standard X-Grip UN7B)
- Minimum Width = 1.875" (Minimum Height = 4.25")
- Maximum Width = 3.25" (Minimum Height = 2.25")
- Depth = 0.875"
Compatible Devices
- Google Pixel
- Motorolla X Droid
- Apple iPhone 7
- Apple iPhone SE
- Apple iPhone 6
- Apple iPhone 5s
- Apple iPhone 5c
- Apple iPhone 5
- Apple iPod touch (All Models)
- Samsung Galaxy J3
- Samsung Galaxy S7
- Samsung Galaxy S7 Edge
Cradle Dimensions: (Large X-Grip UN10B)
- Minimum Width = 1.75" (Minimum Height = 5.5")
- Maximum Width = 4.5" (Minimum Height = 3.25")
- Depth = 0.875"
- Google Pixel XL
- Apple iphone 8 & Plus
- Apple iPhone 7 & Plus
- Apple iPhone 6/6s & Plus
- Nexus 6
- Nexus 5
- Samsung Galaxy S7
- Samsung Galaxy S6
- Samsung Galaxy S5
- Samsung Galaxy Note 7
- Samsung Galaxy Note 4
- Samsung Galaxy Note 3
RAM® X-Grip® Tether Instructions
RAM® X-Grip® Universal Phone Holder
INSTALL INSTRUCTIONS:
1. Remove 2 upper bolts from handlebar clamp with M7 allen wrench.
2. Place the supplied spacers in the wells where you removed the bolts.
3. Install the Lamonster Ram Mount with the ram ball towards the rider, Using the supplied longer bolts.
4. Tighten bolts to 31 FT. LBS using a 8MM allen.
IMPORTANT:
Shorter Spacers for use with F3 and 20+ RT ONLY
If you have any questions about this product email us at LamonsterGarageSales@gmail.com
WARNING: California Residents - www.p65warnings.ca.gov
Product Videos
Custom Field
Product Reviews
77 Reviews Hide Reviews Show Reviews
-
Ram mount for Spyder RT
Installed on a 2018 Spyder RT works great easy installation very happy with this purchase!
-
RAM WITH PHONE HOLDER
Great product easy to install plus the clamp phone holder is awesome phone not going anywhere
-
Ram Mount with GPS Swivel
great quality perfect fit. GPS bolts directly to mount no ball or extention needed. getting the factory handle bar bolts out was a task . Yellow locktite all in them. Impact tool and pull bar needed.
-
Lamonster RAM mount 2.0 for F 3 & RT
My 2018 RT Limited Spyder has an egregious BRP GPS... a piece of crap. BRP should consider Garmin GPS for all future RT Limited Spyders. This is the perfect mount for my Garmin ZUMO GPS that I transferred from my 2016 F3 Limited to replace BRP GPS. Thank you Lamonster Garage for this Center RAM mount. Hope my comment is forward to BRP Can AM... they need to listen to us real world riders.
-
Great add-on for my RTL
If you need a place to mount a phone or gps, this is a very easy install. Replaces two of your handlebar bolts with longer versions.
