Product Description
The "Original" F3/RT Handlebar Riser!!!
Will work on all F3/F3S/F3T/and F3 Limited (expect dragbars)
Will work on all 2020- Present RT and RT Limited
Pulls bars back approximately 45mm or 1 3/4" (1.77') and up 2"
When we received our 2020 RT we saw a couple of things we really wanted to change right away. One thing my wife noticed is her arms weren't in a natural posture like on her F3. All she really need was to have them up a bit and back a bit to be perfect. We got to work on a simple solution that after many miles of hard riding did the trick for her. We added a 2" spacer block that allowed the bars to come up and back and was a simple install.
By removing the top and bottom clamp on the stock bars and adding this riser we were able to achieve our goal. This part is carved out of a solid chunk of 6061 billet aluminum and then powdercoated to match. The M10 stainless bolts are included with the kit. The bolts are long enough to work with any stock top clamp and our LG-1023-1054 top cap for the F3 and 2020-Present RT
Spyders equipped with other center handlebar mounted accessories like power plates and GPS mounts will require longer bolts than the supplied. Choose the "Added Accessory Hardware" option when placing order
Install video with power plate
If you have any questions about this product email us at LamonsterGarageSales@gmail.com
WARNING: California Residents - www.p65warnings.ca.gov
Product Videos
Custom Field
Product Reviews
218 Reviews Hide Reviews Show Reviews
-
Handlebar Riser
Economical alternative to the factory accessory. High quality workmanship and easy installation.
-
Handlebar Riser
I was seeing way too much of my hands in the mirrors of my RTL no matter the adjustments of handlebars or backrest. This riser eliminated this issue giving me unobstructed viewing as well as giving a better fitment and riding position with less reach. Very nicely made product and easy to install. Thank you. Saved buying different bars.
-
Handlebar riser installation 2020 RT Limited
This was a pretty straight forward install. Best to remove both top side panels, they just pop loose. And remove the front speaker grills, they pop loose too. This allows access to the electric lines on both sides of the handle bars. You will have to snip the cable tie on the right side to render enough cable length to move the handle bars on top of the new riser without damaging the electrical lines. These lines pretty much control the bike. You also have to loosen up the lines for the heated grips but that’s just moving the lines within the harness. Very simple install. This riser really eases back pain and allows you to sit upright on the bike and not hunched over to reach the grips.
-
Lamonster provided quick delivery and the price was right!
Great product. Fit the F3 perfectly. Looks like it came with the byke. Makes for more relaxed riding position. Well made product!
-
Handlebar riser
So far so good. It makes my handlebars much easier to reach which helps me sit up straighter which helps my back and shoulders.. Might still need to get short reach bars, but I"ll adjust these to see how that works...when we can ride again.
-
Handlebar Riser
I was looking to raise the handlebars on my 2020 Spyder RT Limited so they would not hit me on my legs on sharp turns. Different handlebars from Can Am are about $150.00 and the Lamonster Handlebar Riser is about $120.00. I am impressed on the quality of their product. It is made from aluminum and powder coated to match the original paint. It has a steel alignment pin. It comes with stainless steel bolts which are so much better than the cheap bolts that the Spyder comes with, which were already starting to tarnish. I also replaced the cheap factory washers with better and thicker, stainless steel ones from my local hardware store. I have not finished installing it just yet but it looks like it will be a great addition to my bike. The original bars have a slotted alignment hole which will allow me to move the bars forward or back for my best fit. I would highly recommend this product for several reasons. It is cheaper than replacing the handlebars, it comes with better stainless steal bolts, and the quality is the best. You can not tell that it is an aftermarket product. It looks O.E.M. You will be impressed as I was. Great product at a cheaper cost than replacing the handlebars. Great product from Lamonster.
-
Awesome!
Raises the handlebar just enough to make the ride more comfortable but doesn't change your riding position to much. You may need 2- longer mounting bolts if you have a garmin zumo mounted in the middle of your bars.
-
Handle bar riser
Great idea, too bad BRP doesn't include on bike from factory. Simple installation. Took maybe 10 minutes. Very satisfied, would suggest for taller riders.
-
Handlebar Riser F3T
Amazing. Puts handlebars where they should be. I'm 6'1" and don't like to reach for the bars. Less stress on the shoulders..
