Product Description
If you've ever had to jump start your Spyder you know what a pain it can be to get the clamps on. If it's not clamped right you won't get a good jump. These stainless steel battery post risers will solve that problem. This will give to an easy way to safely clamp to your post without worrying about shorting out on something. We've been using them on all our Spyders for years but it's the first time we've offered them in the store. It takes a little work to get them on at first but it's well worth the time. Watch the video below and you can see why this is a Lamonster Approved mod.
FITS ALL F3 Models
If you have any questions about this product email us at LamonsterGarageSales@gmail.com
WARNING: California Residents - www.p65warnings.ca.gov
Product Videos
Custom Field
Product Reviews
12 Reviews Hide Reviews Show Reviews
-
Risers
This is one of those mods you hope you never need but are glad you have them if you do. Easy to install and highly recommended. Thanks.
-
Battery post risers
Nice product & neatly machined. But ... The risers are too tall when installed on the battery, they need to be 1/4 inch shorter so they do not hit the plastic opening for battery placement. Install was attempted on my 2019 Spyder RT Limited. Decided to Not cut into plastic frame of opening so that risers would fit into battery space. Then the cover plate w/ foam seal may not seal out dirt, dust properly.
-
Battery Post
Installation was very easy. A good way to increase contact area in case you need to jump start your bike. A note the screw block slides out and then you rotated to the upright position of the threads.
