Product Description
Make trailering your Can-Am Spyder easier and cleaner with Lamonster® Tie Down Rings. These stainless steel front tie-down rings give you a secure strap point at the lower front shock bolt area, helping you avoid running tie-down straps through the wheels or around painted A-arms.
Each ring replaces the nut on the lower front shock bolt. Once installed, the ring provides a convenient front tie-down point for securing your Spyder on a trailer, in an enclosed hauler, or during transport.
Installation requires lifting the Spyder just enough to take pressure off the lower shock bolt so the bolt can be removed and repositioned with the nut facing forward. Torque the fastener to the factory service manual specification for your model.
Fits 2008+ Can-Am Spyder models, including GS, RS, RSS, ST, RT, RT Limited, RT Sea-to-Sky, F3, F3-S, F3-T, and F3 Limited models.
FEATURES:
- Lamonster® front tie-down rings for Can-Am Spyder
- Helps secure your Spyder for trailering or transport
- Provides a clean strap point at the lower front shock bolt area
- Helps avoid running straps through wheels
- Helps avoid wrapping straps around painted A-arms
- Stainless steel ring construction
- Replaces the nut on the lower front shock bolt
- Fits 2008+ Can-Am Spyder models
- Great for open trailers, enclosed trailers, and haulers
- Lamonster SKU: LG-1089
FITMENT:
- 2008+ Can-Am Spyder GS
- 2008+ Can-Am Spyder RS / RSS
- 2013–2016 Can-Am Spyder ST / ST-S / ST Limited
- Can-Am Spyder RT / RT-S / RT Limited
- Can-Am Spyder RT Sea-to-Sky
- Can-Am Spyder F3 / F3-S / F3-T / F3 Limited
Fitment Note: Designed for Can-Am Spyder models using the compatible lower front shock bolt / nut location. Verify installation on modified suspension setups before ordering.
Install Note: Lift the Spyder only enough to take pressure off the lower front shock bolt before removing or repositioning the bolt. Torque the fastener to the factory service manual specification for your model. Recheck all tie-down points before trailering.
What’s Included
- Lamonster® Can-Am Spyder tie-down rings (Pair)
- Stainless steel ring setup for the lower front shock bolt area
If you have any questions about this product email us at support@lamonstergarage.com
WARNING: California Residents - www.p65warnings.ca.gov
Product Videos
Custom Field
Product Reviews
55 Reviews Hide Reviews Show Reviews
-
Tie down rings
Easy to install... they work great!!
-
These tie down hooks should make it easy to secure the machine without doing any damage to it.
Using a low profile floor jack to raise or lower the machine allows the lower control arm to move making it easier to remove the bolt and realign things so the tie down can be installed.
-
Can Am® Spyder Tie Down Rings
The best way to tie down the front. Doesn't mess up the straps of anything on the front end of the trike. Save time, aggravation and give Lamonster a little business.
-
tie down rings
are wonderful for securing the bike
-
Tie down ring
Works and fits Rt Limited great
-
Tie Down Rings
Installed new front Elka shocks while it was a part I installed tie down rings (NEVER KNOW) . I wish they were offered in black but nothing that black paint couldn’t handle . Easy install with or with out changing shocks . Thanks to LAMONSTER GARAGE
-
Tie down rings
Easy to install and works better than running a straps through the wheel. Wish I had purchased them sooner.
-
Tie down rings
Top quality merchandice as always from Lamonster. Easy 10 minute install. Alot safer and easier than wrapping the straps around a arms when trailering.
-
Tie down rings
Very easy to install and if your trailering your bike they make a convenient way to safely secure your Can-Am
-
Hold down rings!!
Work great… easy install!!’
-
Great,
Had to get help to put on, did not have the right equipement. Makes tieing my Spyder RT down faster and ALOT easier.
-
Tie downs
Easy to install , functional a must have if you plan on trailering you spyder
